Friday 6 June 2014

Anti Microbial Polyurethane Wall Coatings

Are you looking for an anti-microbial hygiene coat for your walls? Not satisfied with the performance of your regular acrylic paints? Are you looking for the next level in paint technology?

Polyurethane wall/cement paints are the answer for your interior and exterior wall paint needs.

 These paints have the following unmatchable Properties:

An Operation Theater painted with PU.

. High Sheen Level.
. Anti fungal and Anti Microbial - can be used as a hygiene coat.
. High Washability - Repeated cycles of washing can be performed.
. Forms a water proof barrier.
. Dry Film Thickness of 100micron, almost double that of regular acrylic paints.
. Excellent Crack bridging ability on cement plaster.
. Non Yellowing - shows minimal sulphur dioxide degradation.
. Anti-Carbonation - Protects the cement substrate and steel re-bars in RCC from smoke and chemicals.
. Can be applied on highly porous surfaces to reduce surface porosity and fluid absorption.
. Exterior grade PU has high UV Resistance - shows no degradation in sunlight.

Areas of Application:

. Interior walls of homes, apartments and offices.
. Hospitals and Operation theaters.
. Chemical Laboratories and Industries.
. Diagnostic laboratories.
. Exterior grades can be used as floor coatings.
. Exterior grades can be used for external wall painting and waterproofing.
. Exterior grades can be used as a waterproof barrier for terrace waterproofing.

  

Products available at our store

. MRF New Wall Coat (2 pack Solvent Based, Exterior Grade) 
. For Interior and Exterior walls.
. Thinner - GP Thinner. (10%-30% thinning)
. Primer - MRF Penetration Primer (Clear/Transparent).
                (10% thinning using GP Thinner)
. Coverage of 60sqft per litre per coat.
. Primer covers 60sqft per litre per coat.



. MRF Aquafresh (Water Based, Interior Grade)
For Interior walls.
Thinner - Potable water. (30%-50% thinning)
Primer - MRF Aquafresh Primer (Opaque White). 
             (30% Thinning with potable water)
Coverage of 140sqft per litre per coat.
Primer covers 120sqft per litre per coat.

 

 

Procedure of Application

. Make sure the cement plastered wall is free from dirt and grease and any loose particles. Use methods such as sanding or wire brushing to achieve this.
. Using a roller or brush, apply a coat of primer with required thinning. Allow to dry for 4-5 hours for water based products and 6-8 hours for solvent based products.
. Using leveling materials such as acrylic putty, bring the surface to a smooth finish.
. Apply a second coat of primer with required thinning. Allow to dry.
. Apply the first coat of PU top coat using a roller or brush with required thinning. For 2 pack systems, mix the base and hardner which are supplied in pre-measured packs and apply within the specified pot-life (usually 1-2 hours). Only material required for 1 coat must be mixed at a time.
. Allow to dry for 4-5 hours for water based products and 6-8 hours for solvent based products.
. Apply second and final coat of PU top coat.

We have bacteria free and beautiful walls.

Available in store now, at

Shree Venkateshwara Traders
712, Modi Hospital Road,
West of Chord Road, Mahalaxmipuram
Bangalore 560086

9036092531 - Namit Bhulani
080 - 23592523 - Landline

venkateshwara.traders@gmail.com

No comments:

Post a Comment